Rear View - Sony UP-D6500 Bedienungsanleitung

Part Names and Functions
4 Card Tray
Printed cards are ejected here.

Rear View

6
6 Parallel Interface Connector
Connect the parallel port of the controlling computer
here using a parallel interface cable.
7 SCSI Connectors (UP-D6500 only)
The SCSI connectors on the UP-D6500 can be used to
connect this model to the controlling computer and
other peripheral devices via a SCSI cable. The second
connector can be used to connect other SCSI devices
with this printer. However, if one of the connectors is
not used, set the terminator switch (leftmost SCSI ID
switch 8) to the ON position.
8 SCSI ID and SCSI Terminator switch
(UP-D6500 only)
This switch sets the SCSI ID for the printer. Also, if no
other SCSI devices are connected to the printer, so that
one of the SCSI connectors is unused, set the SCSI
terminator switch ON.
9 AC IN (Power Input) Socket
The supplied AC power cord connects here.
8
Introduction
7 8
9
5 Card Insertion Slot
Insert a card here for manual feed. The optional
automatic card feeder can also be installed here.