Coffee System Cleaning - Jura 657 Original Bedienungsanleitung

6 Maintenance

Coffee system cleaning

CAUTION
34
Precondition: Your IMPRESSA is ready for operation.
T Open the cover of the programming buttons.
6 T Press the milk system cleaning button.
The current maintenance status is shown.
6 T Press the milk system cleaning button again.
START MILK SYSTEM CLEANING
6 T Press the milk system cleaning button to start the cleaning
operation.
CLEANER FOR MILK SYSTEM CLEANING
T Fill a receptacle with 400 ml water and add 1 1/2 caps of the
JURA Cappuccino Cleaner.
T Immerse both milk pipes completely in the cleaning solu-
tion.
T Place a receptacle (at least 500 ml) under the dual spout.
6 T Press the milk system cleaning button.
MACHINE IS CLEANING, the dual spout and the pipes are
cleaned.
The procedure is interrupted, WATER FOR MILK SYSTEM
CLEANING.
T Rinse the receptacle thoroughly, fill it with approx. 400 ml of
fresh water and immerse the milk pipes in the water.
T Empty the other receptacle and place it under the dual spout
once more.
6 T Press the milk system cleaning button.
MACHINE IS CLEANING, the dual spout and the pipes are
cleaned with fresh water.
The operation stops automatically.
Your IMPRESSA is once more ready for operation.
After 220 coffee preparations or 80 switch-on rinses, the IMPRESSA
will prompt you to clean the coffee system.
If the wrong cleaning agent is used, the machine could be damaged
and/or traces of detergent could be left behind in the water.
Only use original JURA care products.
T
E The cleaning programme only lasts about 20 minutes.
E Do not interrupt the cleaning programme. The quality of
cleaning will be impaired if you do so.