System Filling - Jura IMPRESSA XJ5 Professional Bedienungsanleitung

Downloaded from www.Manualslib.com
k T Press the Rotary Switch to confirm the setting.
c T Press the Maintenance button.
E After two months, the filter will cease to work. Set the date on
c T Press the Maintenance button.
E You can interrupt rinsing of the filter at any time by pressing
E The water may be slightly discoloured. This is not harmful to
manuals search engine
appears briefly on the display.
OK
, the Maintenance button c lights up.
INSERT FILTER
FILL WATER TANK
T Remove the water tank and rinse it with cold water.
T Open the filter holder and insert the filter cartridge into the
water tank, exerting slight pressure.
T Close the filter holder. It will click into place audibly.
the date plate on the filter holder in the water tank.
T Fill the water tank with fresh, cold water and reinsert the
tank.
, the Maintenance button c lights up.
PRESS RINSE
T Place one receptacle under the coffee spout and another
under the hot-water nozzle.
FILTER RINSING
nozzle.
the Maintenance button c. Press the Maintenance button c
again to continue rinsing of the filter.
health and does not affect the taste.
Rinsing of the filter stops automatically.

SYSTEM FILLING

flows out of the hot-water nozzle. The operation stops auto-
matically.
HEATING
, the machine rinses. The operation stops auto-
RINSING
matically.
appears on the display. Your IMPRESSA is ready for
READY
use.
Preparing and using for the first time
, water flows out of the hot-water
, the system fills up with water. Water