Switch-On Rinse; Multimedia - Jura 657 Original Bedienungsanleitung

5 Permanent settings in programming mode

Switch-on rinse

Multimedia

30
0 T Press the exit button to exit the programming item.
FORMAT
0 T Press the exit button to exit programming mode.
Your IMPRESSA is once more ready for operation.
You can set whether the switch-on rinse must be started manually
or automatically.
Example: To programme the machine for a manual switch-on rinse,
proceed as follows.
Precondition: Your IMPRESSA is ready for operation.
T Open the cover of the programming buttons.
O T Press the P button until WATER HARDNESS appears.
T Press the + or - button several times until SWITCH-ON
RINSE / AUTOMATIC is shown.
O T Press the P button to enter the programme item.
SWITCH-ON RINSE / AUTOMATIC
T Press the + or - button to change the setting to MANUAL.
O T Press the P button to confirm the setting.
CONFIRMED appears briefly on the display.
SWITCH-ON RINSE / MANUAL
0 T Press the exit button to exit programming mode.
Your IMPRESSA is once more ready for operation.
The following settings can be made in the MULTIMEDIA programme
item:
VOLUME
Z
BRIGHTNESS
Z
CONTRAST
Z
MULTIMEDIA LANGUAGE
Z
Z VIDEO PLAYBACK - INTAKE
Film clips during preparation of a product
U
VIDEO PLAYBACK - ALERT
Z
Film clips when your IMPRESSA prompts an action, for
U
example filling the bean container or water tank
VIDEO PLAYBACK - INSTRUCTION
Z
Explanatory film clips when you have started a maintenance
U
programme