Viewing Information And Maintenance Status - Jura 657 Original Bedienungsanleitung

3 Familiarising yourself with the control options
Viewing information
and maintenance
status
20
Settings in programming mode always follow the same model.
Example: Proceed as follows to change the amount of powder for
an espresso.
Precondition: Your IMPRESSA is ready for operation.
T Open the cover of the programming buttons.
O T Press the P button until WATER HARDNESS 16° dH
appears.
T Press the + or - button several times until PRODUCT
SETTINGS is shown.
O T Press the P button to enter the programme item.
SELECT PRODUCT and the available products are dis-
played.
T Press the 1 espresso button.
1 ESPRESSO / WATER AMOUNT 35 ML
T Press the + button several times until 1 ESPRESSO / POWDER
AMOUNT is shown.
O T Press the P button to enter the programme item.
1 ESPRESSO / POWDER AMOUNT
T Press the + or - button several times to select the powder
amount.
O T Press the P button to confirm the setting.
CONFIRMED appears briefly on the display.
1 ESPRESSO / POWDER AMOUNT
0 T Press the exit button to exit the programming item.
SELECT PRODUCT
0 T Press the exit button to exit the programming item.
PRODUCT SETTINGS
0 T Press the exit button to exit programming mode.
Your IMPRESSA is once more ready for operation.
With the INFORMATION programme item you can view the follow-
ing information:
Number of the prepared coffee and milk specialities and hot
Z
water
Maintenance status and number of maintenance programmes
Z
performed (cleaning, descaling, filter change, milk system
cleaning)