Adjusting The Grinder - Jura 657 Original Bedienungsanleitung

2 Preparing and using for the first time

Adjusting the grinder

CAUTION
16
Both grinders can be adjusted on a continuous scale to suit the roast
of the respective coffee blend.
If you adjust the fineness of grind when the grinder is not in opera-
tion, the setting ring could be damaged.
Only adjust the fineness of grind when the grinder is
T
running.
The fineness of grind setting is correct if the coffee flows regularly
from the coffee spout. In addition, a fine, dense crema is formed.
Our recommendations:
Select a fine setting for a light roast.
Z
U If the fineness of grind is too fine, the coffee only drips from
the coffee spout.
Select a coarse setting for a darker roast.
Z
If the fineness of grind is too coarse, the coffee flows too
U
quickly from the coffee spout.
Example: To change the fineness of grind during coffee preparation,
proceed as follows:
Precondition: Your IMPRESSA is ready for operation.
T Place a cup under the dual spout.
T Press the 1 coffee button.
The grinder starts and 1 COFFEE is displayed.
T Set the setting ring on the bean container to the required
position while the grinder is running.
The coffee will be prepared and the fineness of grind is
adjusted.