Programming - Olivetti CFR3000 Anwenderhandbuch

8. PROGRAMMING

The cash register can be programmed from the Programming environment
accessible from the main Sales screen by selecting [F] (Functions)> GENERAL
FUNCTIONS environment followed by the [Config] > [Set setup] key.
To:
perform programming
confirm the setting made and pass
to the next parameter
skip programming and pass directly
to the next parameter
cancel the setting
exit from the
environment without
programming changes
F
03.03.2012 18.10 Till No.: 1
Vch: ON Pr.list 1 Operator: Disabled
set the related parameter as described in the
following pages.
press
press
press
programming
saving the press
X.
X.
C.
without confirming with .X.
8-1