Chipcard Payments And Operations; Paying For A Sale Using A Chipcard And Point Calculation - Olivetti CFR3000 Anwenderhandbuch

CHIPCARD PAYMENTS AND OPERATIONS

The chipcard is used for management-type functions. Once a chipcard is formatted,
and programmed with the information required for its use and identification of the
customer, it can be used as an:
− Electronic Wallet to record deposits and withdrawals, and to make payments
during a sale.
− Fidelity Card: it can be programmed to calculate reward points or stamps to be
associated with sales transactions.
Note: To program the various modes for using the chipcard, use the SET
commands by selecting (F) Functions>GENERAL FUNCTION>Config
environment, [Set setup] key> Sets List. (For more information on the
SET commands available, refer to the “"Programming”" chapter.)

PAYING FOR A SALE USING A CHIPCARD AND POINT CALCULATION

This function allows you to pay for a sale, recording the amount on the chipcard
inserted into the cash register. The debit is controlled by the maximum credit limit
programmed.
The icon for the reward points is printed automatically at the bottom of the sales
ticket. The number of points is calculated on the basis of a threshold value
programmed with option 203. For example, a threshold value of €€ 30 would give the
following results:
Select [Credit] to display the [CHIPCARD] key.
3-12
TICKET TOTAL
€€ 20
€€ 40
€€ 60
F
03.03.2012
Vch: ON Pr.list 1 Operator: Disabled
TOTAL
18.10 Till No.: 1
0,00
POINTS
0
1
2