Siemens SIMOTICS M-1PH8 Betriebsanleitung Seite 153

EC Declaration of Incorporation
as defined by the EC Machinery Directive 2006/42/EC, Annex II B
The design of the incomplete machine:
External rotor motor for explosion-hazardous areas, type of protection "n" or "e" MK..
•
Axial fan for explosion-hazardous areas, type of protection "c", with external rotor motor for explosion-hazardous
•
areas, type of protection "n" or "e" FB..
• Centrifugal fan for explosion-hazardous areas, type of protection "c", with external rotor motor for explosion-
hazardous areas, type of protection "n" or "e" RE.., RH..
• Centrifugal fan for explosion-hazardous areas, type of protection "c", with EC-internal rotor motor for explosion-
hazardous areas, type of protection "tc" RH.., GR..
Centrifugal fan for explosion-hazardous areas, type of protection "c", with internal rotor motor for explosion-
•
hazardous areas, type of protection "d" ER..
Motor type:
• Asynchronous external or internal rotor motor
• Electronically commutated internal rotor motor (with integrated EC controller)
complies with the requirements in Appendix I, Articles 1.1.2, 1.1.5, 1.4.1, 1.5.1, 1.5.7 in EC Machinery
Directive 2006/42/EC.
The manufacturer is the Ziehl-Abegg AG
The following standards are applied:
EN 1127-1:2007
EN 60204-1:2006
EN ISO 12100:2010
EN ISO 13857:2008
Note:
The specific technical documentation in accordance with Appendix VII B has been written and is available in its
entirety.
The person authorised for compiling the specific technical documentation is: Dr. O. Sadi, address see above.
The specific documentation will be transmitted to the official authorities on justified request. The transmission can
be electronic, on data carriers or on paper. All industrial property rights remain with the above-mentioned
manufacturer.
It is prohibited to commission this incomplete machine until it has been secured that the machine into
which it was incorporated complies with the stipulations of the EC Machinery Directive.
Künzelsau, 15.02.2012
1
SIMOTICS M-1PH8
Betriebsanleitung 05/2012 A5E03986435B AA
Heinz-Ziehl-Strasse
D-74653 Kuenzelsau
Explosive atmospheres - Explosion protection - Part 1: Fundamentals and methodology
Safety of machinery; electrical equipment of machines; Part 1: General requirements
Safety of machinery; basic concepts, general principles for design
Safety of machinery; safety distances to prevent danger zones being reached by the
upper limbs
The maintenance of the EN ISO 13857:2008 relates only to the installed accidental
contact protection, provided that it is part of the scope of delivery.
english
C.1 Betriebsanleitung Fremdlüfter
Dr. O. Sadi - Technical Director Ventilation Division
i.V.
Zusätzliche Dokumente
153