Leister WELDPLAST S1 Bedienungsanleitung Seite 34

Entering names or passwords
• In keyboard mode, you can defi ne names or enter passwords with a maximum of 12 characters.
Keyboard mode
27
Defi ning profi les
• In the «Save Profi le» menu, you can save setpoint settings for the max. output volume, the plasticizing/air tem-
perature, and the air output and give the profi le a name (see «Entering names or passwords» chapter).
• Creating a new profi le:
– In the working display (28), set the required setpoints using the «Plus»
– In the function display (27), select the Settings menu
– In the «Setup» menu, select «Save Profi le» with the «Plus» key (26)
– Select the «User-defi ned» profi le and confi rm with the relevant key (25)
– In the function display (27), select the «Edit selected item» symbol
(25) .
– Enter the desired profi le name (see "Entering names or passwords" chapter), then select the
with the «Plus» key (26)
– In the function display (27), confi rm the selected «Save» symbol
profi le has now been successfully saved and selected.
34
Character selection
Up (21)
Vertical character selection
Down (22)
Minus (24)
Horizontal character selection
Plus (26)
Confi rmed (25) Confi rm the selected character
34
35
and confi rm with the relevant key (25)
34
Change between upper and lower case
Move the cursor in the name
Insert blank space
Delete one character (the character to the left of the cursor)
Select this symbol to switch to the
27
function display
with the «Plus» key (26)
35
Symbol selection
Symbol selection
Confi rm the selected symbol
or «Minus» keys (24/26).
.
.
.
and confi rm with the relevant key
.
with the relevant key (25)
symbol
. The