Cleaning And Maintenance - EdilKamin CRISTAL 45 V-EWS Installations-, Betriebs- Und Wartungsanleitung

CLEANING AND MAINTENANCE

Cleaning the plant
Every season it is necessary to check that the smoke channel
and all the fuel gas discharge conduits are free. Therefore
clean them well. Eventually remove the volatile ash using an
appropriate ash sucker. Consult the area After-sales Centre
regarding the eventual necessary control and maintenance
measures.
Cleaning the glass
It is possible to open with doors the hearths panel to clean
the glass.
For this purpose, it is necessary, before opening, to block the
hatch in its closing position, by rotating the stop lever (6 fig. 1)
towards the centre.
At this point it is possible to unblock, using the appropriate
tool (cold hand) provided, the pallet plates ( 7- fig.3 ) at the
right and left side of the hatch (rotate by 90°).
The panel can now be tilted open and cleaned. Once cleaned,
fix the pallet plates again ( 7 - fig.4 ) and unblock the stop
lever ( 6 - fig.2 ).
Should there only be a slight coat of dirt on the glass, clean it
using a dry cloth whilst it is still warm.
In case of more consistent dirt, EDILKAMIN supplies an
appropriate product "GlassKamin", which can be found
through the authorised retailers.
Never use abrasive
detergents!
Never hot clean.
products or aggressive
cold hand 7a
6
Figure 1: blocked stop lever
6
Figure 2: unblocked stop lever
7
Figure 3: open hatch blocked (rotate the pallet by 90°)
7
Figure 4: closed hatch blocked (rotate the pallet by 90°)
37