Front Panel; Side Panels; Electric Connections - EdilKamin CRISTAL 45 V-EWS Installations-, Betriebs- Und Wartungsanleitung

front panel

- fix the mouth frames (22) to the top part after having made a hole of 37x10.5
cm.
- fix the probe (10) in the mouth (22) hole
- verify that the probe wire does not interfere with the movement of the retracting
hatch.

side panels

- finish the false hood by mounting the side panels.It is advisable to make a hole
in correspondence of the probe on the flue, to be closed with a grill, in order to
facilitate the inspection of the area and to eventually change the same probe.
- apply the trigger grills to the mouths from the outside.
- once finished, insert the plug in the 220 V network.
NB: (fig.C) the side base (11) of the covering must be removable to inspect the
fan and the electronics.
The central base must always be removable to inspect the actuator of the primary
air (12).
Probe
220 V
Network
11
4
Fan
Grill
9
12

ELECTRIC CONNECTIONS

- must conform with the installation and
construction rules in force
- avoid that the electric wires have areas in
22
contact with the factory and the flue and with
hot components
- the electric and electronic appliances
Synoptic panel
supplied with the chimney must not be
5
tampered with
- the electric and electronic components
are always under voltage; before any
intervention, unplug or deactivate the main
electric board.
fig. C
29