AsViva T20 Benutzerhandbuch Seite 58

Problem
E01
E02
E03
E04
E05
Error in power-on self-test of control-
E06
E07
Remove the power cable for a few seconds if a problem occurs.
If the problem still occurs, please contact our support team.
If you have any questions to our fitness products, our employees will help you.
58
TROUBLESHOOTING
Problem
Communication problem
Motor
Speed sensor
Overvoltage
Overcurrent protection
ler or loss of parameter
Safety lock
Solution
• Check all cable connections.
• No signal from PCB.
Replacement neccessary.
• No signal from controller.
Replacement neccessary.
• Speed sensor broken.
Replacement neccessary.
• Sensor has detached.
• Check for the corerct voltage.
• Repalce motor / speed sensor.
• Replace the controller.
• Person to heavy.
•
• Motor broken.
Replace the motor.
• Controller defect.
Replace the controller.
• Reenter the parameters..
• Check if the safety lock is on its position.
Refill oil.