Start-Up - AsViva T20 Benutzerhandbuch

START-UP

Plug the power cable to the power supply and turn on the powerswitch.
The display will light up and you will hear a sound.
Press „START". The treadmill will start with the slowest speed. The „Speed-Window" is showing the
current speed of the treadmill.
Let the treadmill run without standing on it and check if everything is shown correct on the display.
Speed Incline
Increse the speed ( right icon ) until you reach Increase the incline until its maximum level of
the highest speed ( 20km/h ). Please check if the 15%. Please check if the incline changes after
treadmill runs correct. pressing these buttons.
Stop your workout in a safe way:
Press „STOP" to turn of the treadmill. After the treadmill has stopped completely, you can cut the power
supply.
Please note: The computer turns on only when the safety lock is on its place. As soon as the safety
lock is not on its place anymore, the treadmill will stop for safety reasons.
Always clip the clip of the safety lock to your clothes.
If everything works fine, you can start to run on the treadmill.
42