Removing Transport Safety Packaging; Drying Rack Unpacking - AEG Electrolux LAVATHERM 88840 Benutzerinformation

50
Installation
• The hot air emitted by the tumble dryer can reach temperatures of up to 60°C. The
appliance must therefore not be installed on floors which are not resistant to high tem-
peratures.
• When operating the tumble dryer, the room temperature must not be lower than +5°C
and higher than +35°C, as it may affect the performance of the appliance.
• Should the appliance be moved, it must be transported vertically.
• The appliance must not be installed behind a lockable door, a sliding door a door with a
hinge on the opposite side to that of the appliance in such a way that a full opening of
the dryer is restricted.

Removing transport safety packaging

CAUTION!
Before use all parts of the transport packaging must be removed.
1. Open loading door
2. Pull off adhesive strips from inside ma-
chine on top of drum.
3. Remove foil hose and polystyrene pad-
ding from the machine.

Drying rack unpacking

CAUTION!
Before appliance use all packaging parts and dry-
ing rack must be removed from the drum. The in-
side of the drum must be clean.
To unpack the rack:
1 2
4 3