Setting The Time - AEG Electrolux LAVATHERM 88840 Benutzerinformation

1. Press the OPTION (OPTIE) button repeat-
edly, until the desired language appears in
the display.
2. To confirm the choice press the OK but-
ton. After this a text appears asking you
again to confirm the set language. This
step is added to ensure that you did not
set a language by mistake.
To confirm the choice press the OK button
again.
In case of mistake or at any time after the first time use a short-cut is provided to avoid
going through the SETTINGS . Keeping pressed together the buttons STEAM LEVEL (NIVEAU
STOOM) and DRYNESS (DROOGTEGRAAD) for about 5 seconds the language setting view
appears.

Setting the time

Just after setting the language you are asked to
set the time.
Short help-text will change into the time setting
view as soon as you press the OPTION (OPTIE) or
OK button.
So that the time and the end of the programme
are correctly displayed, please check the time
shown in the display and set the current time if
necessary.
To select the time please use OPTION (OPTIE) but-
ton to confirm press OK.
See also the chapter " Machine settings".
Before first use
In order to remove any residues which may have been produced during production, wipe
the dryer drum with a damp cloth or carry out a brief drying cycle (30 MIN) with damp
cloths in the machine.
1. Turn the programme knob to TIME (TIJD PROGR.).
2. Press the TIME (TIJD PROGR.) button repeatedly until 30' appears in the display.
3. Press the START PAUSE (START PAUZE) button.
First start-up
INSTELLINGEN
Terug
TAAL
TIJD
Press OPTION to set time. Press
OK to activate it.
SETTINGS
LANGUAGE
CLOCK
BRIGHTNESS
57
NED
9:21