Prosteam System; Fill Steam Water Tank - AEG Electrolux LAVATHERM 88840 Benutzerinformation

• To avoid laundry becoming tangled: close zips, button up duvet covers and tie loose ties
or ribbons (e.g. of aprons).
• Empty pockets. Remove metal items (paper clips, safety pins, etc).
• Turn items with double-layered fabrics inside out (e.g. with cotton-lined anoraks, the
cotton layer should be outermost). These fabrics will then dry better.
Special notes about ProSteam
• Before treating garments with a ProSteam programme, remove stains by washing or
using localized stain removal
Opening loading door / loading laundry
1. Open loading door:
Use force to push against the loading door
(push point - see picture)
2. Load your laundry (do not force it in).
CAUTION!
Do not jam laundry in between the loading
door and rubber seal.
3. Close loading door securely. Lock must
audibly lock.

ProSteam system

Fill steam water tank

You must fill up the steam water tank before using a ProSteam programme for the first
time. Use the distilled water provided if there is not yet any condensed water from previous
drying programmes (see chapter on 'Care and cleaning, Emptying condensed water con-
tainer'). If, after a ProSteam programme is selected, the following message: The steam water
tank is empty. Please fill it and then press START appears on the display, you will need to
fill up the steam water tank with distilled water. Otherwise, you will not be able to start
any ProSteam programme.
Pull drawer containing condensed water contain-
er out a little 1 , then pull the water tank's filler
neck 2
Important! Only fill the water tank with dis-
tilled or fully desalinated water. Do not use
tap water or additives! You can also use the
condensed water from the tank, as long as you
filter it first (use the canister supplied with
the filter fitted: see picture opposite).
ProSteam system
2
59
1