Xerox DocuMate 3220 Benutzerhandbuch Seite 51

6. Select a file format in the
The formats are based on the type of Destination Application you select. The icon names indicate
their file types. See
7. Select a scanning configuration in the
The configuration's basic settings include: scanning mode, resolution (dpi), page size, brightness
(Br), and contrast (Cr). To see a selected scan configuration's settings, click its icon. Click the icon
again to close the detailed information. Refer to
Before Scan on page 68 for instructions on creating and modifying scan configurations.
8. Click on to save the changes.
OK
9. Place an item in the scanner and click the OneTouch button to start scanning.
The scanner scans and sends the image to the selected destination, with the file format and scan
configuration you specified.
—displays a window for selecting properties for a destination. This button is disabled if
Properties button
the selected destination application does not have global configuration properties.
—updates the links between all your computer's Destination Applications and OneTouch.
Refresh button
If you install new software that can be used as a Destination Application, click the
the new software to OneTouch.
New/Copy/Edit/Delete buttons
to change or remove them.
Delete
OK/Cancel/Apply buttons
but leaves the window open so you can continue making additional changes.
without accepting any changes.
panel.
Select format
File Formats on page 63 for more information about the available formats.
Select configuration
—click or
New Copy
— accepts any changes and closes the window.
OK
list.
Scan Configurations
to add new scan configurations to the list. Click
Xerox
on page 55 and Configure
button to link
Refresh
Edit
accepts any changes
Apply
closes the window
Cancel
® DocuMate ® 3220
User's Guide
or
51