Scan From The Flatbed Glass; To Scan From The Flatbed Glass - Xerox DocuMate 3640 Benutzerhandbuch

Loading Documents to Scan

Scan from the Flatbed Glass

Use the Flatbed glass to scan documents on light weight paper, such as credit card receipts, or items
that cannot be scanned with the Automatic Document Feeder, such as pages in a book or plastic cards.
NOTE: You must remove any pages from the Automatic Document Feeder before scanning from the
Flatbed glass. If pages are in the Automatic Document Feeder, they will be scanned instead of the
page on the Flatbed glass.

To scan from the Flatbed glass:

1. Remove any pages from the Automatic Document Feeder.
2. Open the scanner lid and place the page on the scanner glass, face down.
3. Align the paper with the arrows on the scanner for the size of paper you are using.
4. Close the lid.
5. Press the Up or Down Destination Selector buttons to choose a scan setting. Then press either the
Simplex or Duplex button.
6. The face-down side of the page is scanned and the image is sent to the selected Destination
Application from the One Touch utility.
22 DocuMate 3640
User’'s Guide