Fuses; Main Components - Nederman FlexPAK 800 Bedienungsanleitung

EN FlexPAK 800/1000
FlexPAK 1000
Weight
Inlet/outlet diameter
Sound level
Filtration efficiency*
Maximum ambient
temperature
Relative humidity
Compressed air
Material recycling
Control Filter area
Control Filter material
* According to DIN EN/IEC 60335-2-69.
3.4

Fuses

Table 3-3: Fuses
Fuse
Main fuse F1, 230 V
Main fuse F1, 400 V
Main fuse F1, 460 V
Transformer, primary fuse F2 and F3
Transformer, secondary protection
F4
F5
* General size, see also the included electrical diagrams.
3.5

Main components

WARNING!
Never use the unit without a plastic bag.
CAUTION!
Use Nederman original bags only.
Figure 3, 4 and 5 show the main components of the unit:
1. Collector bin, see figure 3.
2. Dust extractor, see figure 3.
3. Textile filter bags, see figure 3.
4.
Filter holder, see figure 3.
5.
Filter Cleaning Valve (FCV), see figure 3.
6.
Connection duct from the dust extractor to the inlet silencer, see figure 3.
7.
Start and control unit, see figure 3 and 4.
8.
Control panel, see figure 3 and 4.
18
439 kg (968 lb)
150/160 mm (7.87/6.29")
70 dB(A)
Dust class L
-10 – +40 °C (14–104 °F)
Max. 85%
6–7 bar (87–102 PSI)
93.6% per weight
1x12 m² (1x129 sqft)
Polyester
Size
65 A
35 A
40 A
0,8 A*
50 mA*
1 A*
Explosion risk.
Risk of equipment damage.
439 kg (968 lb)
150/160 mm (7.87/6.29")
70 dB(A)
Dust class L
-10 – +40 °C (14–104 °F)
Max. 85%
6–7 bar (87–102 PSI)
93.6% per weight
1x12 m² (1x129 sqft)
Polyester
Type
Slow mains fuses
Slow mains fuses
Slow mains fuses
Slow fuses, 10.3×38
PTC resistor
Fast, 5×20
Slow, 5×20
439 kg (968 lb)
150/160 mm (7.87/6.29")
70 dB(A)
Dust class L
-10 – +40 °C (14–104 °F)
Max. 85%
6–7 bar (87–102 PSI)
93.6% per weight
1x12 m² (1x129 sqft)
Polyester