Operation; Description Of The Appliance; Preparing The Appliance - Kärcher GP 60 MOBILE CONTROL Originalbetriebsanleitung

ities or lacking experience and/or
knowledge, unless they are supervised
by a person responsible for their safety
or are instructed by these persons on
the use of the device. Children should
be supervised, to ensure that they do
not play with the device.
Prerequisites for the appliance's
stability
Caution
Create stability for the appliance prior to all
work on or with the appliance to prevent ac-
cidents or damage.
The stability of the appliance is warrant-
–
ed when it is placed onto an even sur-
face.

Operation

Illustrations on fold-out page 3!

Description of the Appliance

1 Power cord with plug
2 Connection G1(33.3mm) Pressure pipe
3 Filling nozzle with pre-filter
4 Connection G1(33.3mm) Suction pipe
5 Drain opening
6 ON/OFF switch
7 Remote control

Preparing the Appliance

Danger
Please follow the safety instructions before
start-up!
Illustration
 Connect suction and pressure pipes us-
ing Kärcher special accessory G1
(33.3mm).
Note: To pump heavily contaminated
water, e.g. from wells or ponds, we rec-
ommend using an additional prefilter.
(optional: 6.997-344.0)
Illustration
 Unscrew the lid of the filling nozzle and
fill in water till it overflows.
 Screw on the lid on the filling nozzle.
Caution
Before each use, you need to ensure that
the device is connected according to the
description in the chapter on Preparations
because programs saved can start immedi-
ately as soon as you plug in the mains.
 Insert the mains plug into the socket.
Illustration
 Tip: Raise the suction hose by approx.
1m to reduce the suction period.
Illustration
 Switch on the device at the on/off switch
or via remote control (see: Chapter on
Remote Control: "Switch on/off pump
manually").
 Wait till the pump sucks in and trans-
ports water uniformly
Warning
The water in the pump heats up if there is
no water supply or the pressure side is
closed and can cause injury if it flows out!
The pump may be operated for maximum 3
minutes in this operating status.
 Select other functions via remote con-
trol
– 3
EN
Operation
19