Parkside PLS 48 D2 Gebrauchanleitung Seite 24

Avoid contact of the hot soldering tip with the plastic parts of
„
the multifunctional holder. Otherwise this may result in damage
to the device.
In case of danger, immediately remove the plug from the mains
„
socket.
CAUTION! RISK OF POISONING! Do not breathe fumes.
„
In the case of working for prolonged periods, in which hazardous
„
fumes may arise, always ensure adequate ventilation of the
workplace. It is recommended to wear protective clothing such
as protective gloves, mouth protection and a working apron.
Avoid eating, drinking and smoking in rooms where soldering is
„
taking place. Otherwise, traces of lead adhering to the hands
could get into the human organism through food or cigarettes.
Remove inflammable objects, liquids and gases from the working
„
area of the device before use. Keep your work area clean to
prevent accidents.
Always thoroughly wash your hands after soldering.
„
Never throw soldering waste into household waste. Soldering
„
waste is hazardous waste. National and international safety,
health and work safety regulations must be observed.
After use, place the device on the stand and allow it to cool off
„
before packing it away.
When the device is not being used, keep it in a safe place and
„
protected from dust and moisture.
24
| GB
PLS 48 D2