Setting The Time / Date; Entering Local Dialling Code - AUDIOLINE 300G Bedienungsanleitung

INSTALLATION
2.8

SETTING THE TIME / DATE

If you want to reset the current time and date or change a value already entered, proceed as
follows:
Note: All entries must be made as two digits. If you want to enter the date 8
press the numbers 08 for the day and 10 for the month.
PLEASE FOLLOW THE INSTRUCTIONS:
Menü
Press the button.
Turn the Jog dial until the "Einstellungen" message appears in
the display.
Ja
Now press the
Now enter the current day, the month, the hour and the
minutes one after the other using the keypad.
The date and time are saved by pressing the
To exit programming mode, press the
2.9

ENTERING LOCAL DIALLING CODE

Telephone numbers must always be stored in mobile phones with the dialling code. If these
numbers are then transferred to your 300G telephone via the SIM card, the dialling code can of
course be omitted when making local calls. For this purpose the 300G telephone must know
your local dialling code.
A. Please follow the instructions:
Menü
Press the button once.
Turn the Jog dial as far as the "Einstellungen" message
Ja
Confirm with
Turn the Jog dial until the "Ortsvorwahl" message appears in the
display.
40
button twice.
.
AUDIOLINE TELEPHONE 300G
Ja
button.
Nein
button twice.
th
of October,
Display shows:
Hinzufügen
Einstellungen
Date and time. The first
figure of the date flashes.
If you want to set the 24
October and the time
15.05, enter the numbers
"24 10 15 05" using the
keypad.
Display shows:
Hinzufügen
Einstellungen
Uhr
Ortsvorwahl
th