The "R" Signal Button; R" Button On Private Exchanges; R" Button And The Deutsche Telekom T-Net; Setting The Flash Time - AUDIOLINE 300G Bedienungsanleitung

AUDIOLINE TELEPHONE 300G
5.

THE "R" SIGNAL BUTTON

You can use the "R" signal button on your telephone on private exchanges and when using
DEUTSCHE TELEKOM's T-Net functions.
5.1

"R" BUTTON ON PRIVATE EXCHANGES

If you have connected your AUDIOLINE 300G to a private exchange, you can use all the
facilities such as call transfer, automatic recall, etc. The "R" signal button gives you access to
these facilities. The FLASH time "100ms" will be required on a private exchange. (Adjustment,
see 5.3). You can find out from the dealer from whom the equipment was purchased whether
your telephone will work on your private exchange without any problems.
5.2

"R" BUTTON AND THE DEUTSCHE TELEKOM T-NET

Your AUDIOLINE telephone supports the most important DEUTSCHE TELEKOM added value
functions (e.g. brokering, call waiting, three-way conference, etc.). The T-Net works using the
"FLASH 300ms" setting (adjustment, see 5.3). Please contact DEUTSCHE TELEKOM to gain
access to T-Net functions.
5.3

SETTING THE FLASH TIME

A. Please follow the instructions:
Menü
Press the button once.
Turn the Jog dial until the "Einstellungen" message appears in
the display
Ja
Confirm with
Turn the Jog dial until the "Flash Zeit" message appears in the
display.
Ja
Confirm with
Use the Jog dial to set the required flash time.
Ja
Confirm with
Nein
Press the button twice to exit programming
.
.
.
„R“ – SIGNAL BUTTON
Display shows:
Hinzufügen
Einstellungen
Uhr
Flash Zeit
Current flash time
100 - 300- 600 ms
Flash Zeit
57