Herunterladen Inhalt Inhalt Diese Seite drucken

KKT KOLBE EBM8501ED Benutzerhandbuch Seite 37

Einbau-mikrowelle
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Using the device
WORKING mode
display is on, show lots of information, not same as above
mention.
NOTE:
1. First use the combi microwave oven; it's normal if some
smell happen.
2. Dishes must always be placed on the grids supplied with
the appliance.
3. Prolonged pressure on the
causes the display to run quickly through the lists or va-
lues that are being adjusted.
4. If, when the display switches on, the user does not acti-
vate any button, the screen will switch off automatically
after 2 minutes.
Using your oven for the first time
After connecting the oven to the power, display shows
"welcome to use" then shows PROGRAMME Page auto-
matically.
To set the appliance,
at any working mode, press button menu
display switch to SET Page, as below. Totally 7 settings are
allowed to choose by pressing button
button
to confirm it.
7 Settings include:
• Minute minder. Set the alarm clock time.
• Language. Two Options: English, Chinese
• Time. Set current time.
• Select TIME and press
• The 4 digits will start to flash.
• Adjust using the
and
• Press
to confirm.
• Display. Three settings
• On. STANDBY mode, display on and shows current time
• On for 60 second. STANDBY mode, display on and
shows current time for 60seconds, then turn off auto-
matically
• No on. STANDBY mode, display off, dark.
• Light. Two options, "on" and "on for 3mins"
• Frequency. Set tone for buttons.
• Exit. Switch to Programme page.
and
buttons
any time,
and
press
to change the time.
buttons.
To select the programme
1. Press the
button or
control panel to PROGRAMME page.
PROGRAMME page includes three function types,
Universal, Automatic, Microwave. Each program has
several COOKING PROGRAMMERS, see below chart.
2. Make your selection by pressing
button
and press
displays the cooking programmers. Some programmer
has special setting(see below chart), set by
and
button, then press
3. Select the desired programmer using the
and
button, and press
4. Press the "START/STOP" button
5. The oven begins heating.
6. An audible signal, followed by the lighting up of all the
pre-heating indicators, indicates that the oven has
reached the desired temperature.
button to switch on the
button and
to confirm. The screen now
button
to confirm.
button
to confirm.
to start cooking.
37

Werbung

Kapitel

Inhaltsverzeichnis
loading

Inhaltsverzeichnis