The Administration Tab - Factory Defaults; The Administration Tab - Firmware Upgrade; Chapter 6: Configuring The Wireless-G Broadband Router The Administration Tab - Factory Defaults; Figure 6-41: Administration Tab - Factory Defaults - Linksys WRT54GS Bedienungsanleitung

Wireless-G Broadband Router with SpeedBooster

The Administration Tab - Factory Defaults

Click the Yes button to reset all configuration settings to their default values, and then click the Save Settings
button. Any settings you have saved will be lost when the default settings are restored. This feature is disabled by
default.

The Administration Tab - Firmware Upgrade

Firmware can be upgraded by clicking the Upgrade button after browsing for the firmware, which you can
download from the Linksys international website. Do not upgrade your firmware unless you are experiencing
problems with the Router. For more information about upgrading firmware, refer to "Appendix C: Upgrading
Firmware".
Chapter 6: Configuring the Wireless-G Broadband Router
The Administration Tab - Factory Defaults

Figure 6-41: Administration Tab - Factory Defaults

Figure 6-42: Administration Tab - Firmware Upgrade

firmware: the programming code that runs a
networking device
upgrade: to replace existing software or firmware
with a newer version
download: to receive a file transmitted over a networ
59