Drive; Miscellaneous - Derby cycle Impulse Speed 2.0 Originalbetriebsanleitung

Select a language using the
button conirms your selection and takes you back to the
menu sub-item display.
Unit: Under the item "Unit", you can choose whether the
distance travelled and speed are displayed in kilometres
(km) or miles (mi). Use the
metres (kmh) or miles (mph). Tapping the
irms your selection and then takes you back to the menu
sub-item display.

7.3.4.2 Drive

Choose rom the following using the
• Wheel circumference
• Shit Sensor
• Climb Assist
• Back
Conirm your selection by tapping the
takes you back to the menu sub-item display.
Wheel circumference: You can set the "wheel circumfer-
ence" to any value between 1540 mm and 2330 mm by
pressing the / buttons on the control unit. Tapping the
button conirms your selection and then takes you back
to the menu sub-item display.
This setting needs to be changed if, for example,
you it new tyres of a diferent size on your S-
Pedelec. In order to display the correct data, the
new wheel circumference must be entered. You
can enquire about the wheel circumference at your
specialist cycle shop.
Shit Sensor: Choose rom the following values using the
/ button.
50 ms 100 ms 150 ms 200 ms 250 ms 300 ms
OFF
Conirm your selection by tapping the
22 Original User Manual | Pedelec Impulse Speed 2.0
/ buttons. Tapping the
/ buttons to choose kilo-
button con-
/ button:
button. This
button.
The Shit Sensor recognises gear shiting and
imperceptibly interrupts the power assist for rac-
tions of a second. This enables you to move more
smoothly and considerably faster through the
gears. The higher the value you set, the longer the
assistance is interrupted for, and the more time
there is for shiting gears.
Climb Assist: Choose rom the following values using the
/ button.
1 2 3
Conirm your selection using the
You can inluence the response time of the power
sensor with the Climb Assist. The lower the value
you set, the less responsive the system becomes.
The higher the value you set, the more dynamic
the system becomes, but beware a yo-yo efect.

7.3.4.3 Miscellaneous

Choose rom the following using the
• Factory settings
• Sotware
• Back
Conirm your selection by tapping the
Factory settings: The following question appears: "Restore
factory settings?". Select "Yes" if you wish to reset the
system to its original settings. Select "No" if you wish to
retain all the settings you have made. Conirm your selec-
tion by tapping the button.
Sotware: This takes you to the items:
• Version
• Update
• Back
Make a selection using the
go to that item by tapping the
4 5 6 7
button.
/ button.
button.
/ button, then conirm and
button.