Care And Cleaning - Klarstein 10032291 Bedienungsanleitung

Keep Warm Function
If you want to select the keep-warm function, press the button (7) , the keep-warm
symbol will be shown on the display. In this mode press the temperature buttons [+] and
[-], to set the desired temperature. The available range of temperature setting 40-100 .
In order to switch off the keep-warm function, press the keep-warm button (7) again
or ON/OFF button (10) to switch off the kettle. Otherwise the water temperature will
be maintained at a per-set level. If no action is taken for 30 minutes in the keep-warm
mode, the kettle will switch off. Press the ON/OFF button (10) again to turn on the kettle
(the kettle beeps once).
Note: The kettle may be used only with the base attached. Do not open the lid when
boiling water.

CARE AND CLEANING

Note: Before your cleaning, please unplug the electrical kettle and make sure it has
been cooled down. Never immerse any part of the cable, plug, power cord base or
kettle in water or any other liquid.
Exterior of the kettle
• Wipe the exterior of the kettle with a piece of damp cloth and then dry it with a
piece of dry cloth.
• Never use harsh chemicals or abrasive cleaning agents as these may damage the
finish of your kettle.
Interior of the kettle
Over using a period of time, lime scale would be built up inside of your kettle.
To remove lime scale:
1 Half fill the kettle with water and add the juice of a lemon.
2 Boil up the water and allow it to stand for 15 minutes before discarding.
3 Repeat steps 1 and 2 several time, please using cold water only. Then the lime scale
inside of your electrical kettle will be clean up.
EN
13