Safety Switch-Off; Care And Cleaning - Klarstein Arabica Bedienungsanleitung

• Place the kettle on the base (5) so that the underside of the kettle fits exactly into the
contact on the base.
• Plug the plug into a wall outlet.
• Turn the on/off switch (6) to position I to start the heating process. The indicator
light will illuminate.
• As soon as the water reaches boiling point, the on/off switch (6) automatically
returns to position 0 and the indicator light goes out. The kettle can also be switched
off manually by setting the on/off switch to position 0.
• The hot water can now be safely poured through the outlet into another container.

Safety switch-off

• This kettle is equipped with a safety cut-out to protect the appliance from damage in
the event of improper use. If the appliance is inadvertently operated without water
or all the water evaporates, the safety switch automatically switches off the heating
element.
• In this case, disconnect the plug from the socket immediately and allow the kettle
to cool for 15-20 seconds. Fill it up with water, insert the plug into the socket and
restart it.

CARE AND CLEANING

Note: Before your cleaning, please unplug the electrical kettle and make sure it has
been cooled down. Never immerse any part of the cable, plug, power cord base or
kettle in water or any other liquid.
Exterior of the Kettle
• Wipe the exterior of the kettle with a piece of damp cloth and then dry it with a
piece of dry cloth.
• Never use harsh chemicals or abrasive cleaning agents as these may damage the
finish of your kettle.
EN
13