Cleaning And Care - Klarstein 10033074 Bedienungsanleitung

Problem
Wort not pumped out

CLEANING AND CARE

• Each part that has been in contact with the wort should be cleaned after brewing.
• Do not use a dish washer to clean small parts.
• Do not use acidic, alkaline or salty liquids to clean.
• Water or cleanser essence is suitable for cleaning.
• Pumping hot water through the circulation tube and anti-burn tube to clean is
suitable.
Possible causes
Air or bubbles in the pump
Filter tube or filter basket is
blocked
Wort is too thick and sticky Fill with water
What to do
Make sure the water level
is higher than the tap inlet,
turn off the pump, open
one of the valves and then
open the tap to get the air
out of the pump
Power off the brewer, take
all the wort out when it is
cool enough and clean the
filter tube or filter basket
EN
37