Care And Cleaning - Klarstein teatime Bedienungsanleitung

EN
12
OPERATION
Note: When using the unit for the first time, boil water several times in
succession and then pour it away to remove dust and production residues.
1. Place the device on a dry, level surface. Make sure that the surface is heat-
resistant.
2. Remove the kettle from the base, open the lid and fill with cold water.
3. Make sure that the water level is between the min and max marks. Do not
turn on the device when the kettle is empty.
4. Check if the filter is properly seated before boiling the water.
5. Close the lid and put the kettle back on the base.
6. Plug the plug into the socket.
7. Turn on the unit at the on/off switch. The light will turn on, indicating that the
kettle is heating up.
8. Pour out the boiling water very carefully so that you do not scald yourself.

CARE AND CLEANING

Note: Before your cleaning, please unplug the electrical kettle and make sure it
has been cooled down. Never immerse any part of the cable, plug, power cord
base or kettle in water or any other liquid.
Exterior of the Kettle
• Wipe the exterior of the kettle with a piece of damp cloth and then dry it with
a piece of dry cloth.
• Never use harsh chemicals or abrasive cleaning agents as these may damage
the finish of your kettle.