Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Using USB memory devices
Playing files from USB memory devices
1.
Insert the USB memory device into the USB slot which is located on the left hand side of the radio
behind the rubber cover.
2.
Press the Power On / Off button to turn on the radio and Press the Source button to select
USB mode. "Loading" will appear on the LCD display. Then the radio will start playing from the
USB memory device.
NOTE
The text coding only supports ASCII.
3.
To pause playing, press the Play / Pause button (
Pause button (
NOTE
● If you turn off the radio, the next time the radio is turned on, it will resume to the last played
track.
● If you switch to other mode when playing from the USB memory device, playback will be
paused. When you switch to the USB mode again, playback will resume from the point where it
was paused.
● It is recommended to store only music files (MP3 / WMA / AAC) in your USB memory device. If
there is one folder contains file(s) other than music files, your radio will skip this file / folder and
the file / folder number shown on the display will not be serial.
) again.
). To resume playing, press the Play /
27
Werbung
Inhaltsverzeichnis
