Technical Inspection; Wireless Remote Control; Maintenance And Storage - Pulsar ACCOLADE Bedienungsanleitung

Connection modes:
Memory card (external memory). In this mode the device is
detected by the computer as a flash card. This mode is designed for
work with the files saved in device's memory. The device's functions
are not available in this mode; the device turns off automatically.
If video recording was in progress when connection was made,
recording stops and video is saved.
When USB is disconnected from the device where connection is in
the USB Mass storage device mode, the device remains on the OFF
state. Turn the device on for further operation.
Power.
In this mode PC/laptop is used as an external power supply. The
status bar shows icon
functions are available.
Note: The Battery pack installed in the device is not being charged!
When USB is disconnected from the device when in the Power mode,
the device keeps operating with Battery Pack, if available, and it has
sufficient charge.
21

WIRELESS REMOTE CONTROL

(bought separately)
Wireless remote control (RC) duplicates the POWER ON function,
digital zoom, video start/stop and menu navigation.
Controller
(17)
Brief press Enter quick
menu
Long press Enter main
menu
Clockwise Increase
parameter,
rotation
move upwards
Counter- Decrease
clockwise parameter,
rotation move
downwards
25
. The device continues operating and all
Button Button Button
ON (18) ZOOM (19) REC (20)
Turn on Activate Start video
device / discrete recording
Calibrate zoom
sensor
Display Off / Activate Switch
Turn off function PiP between
device video/photo
modes
19
18
17
22

TECHNICAL INSPECTION

Check:
External view (there should be no cracks on the housing).
The state of the objective and eyepiece lenses (there should be no
cracks, spot, dust, deposits etc. ).
The state of the Battery Pack (should be charged) and electric
terminals (there should be no oxidation ).
Correct functioning of the controls.
23

MAINTENANCE AND STORAGE

Maintenance should be carried out no less frequently than twice a
year, and should consist of the following measures:
Wipe external plastic and metal surfaces clean of dust and dirt with
a soft cloth moistened with a synthetic cleaning agent.
Clean the electric terminals of the Battery Pack and device's
battery slot using a grease-free organic solvent.
Check the objective and eyepieces lenses. If required, remove dust
and sand (preferably by a noncontact method). Clean the external
surfaces of the lenses with products expressly designed for this
purpose.
Store the device in a carrying case. Remove the Battery Pack
for long-term storage.
20
26