Beyerdynamic AMIRON WIRELESS Handbuch Seite 9

Amiron wireless – Headphones
Pairing and clearing the list of players
If there are already several players in the list of your Amiron wireless and your Amiron
wireless cannot be paired with another new player, the list is full and should be cleared
so that the new player can be added.
This is how to clear the list:
• Hold down the button 3 of the turned off Amiron wireless for more than 10 seconds,
so that the Amiron wireless will switch into the pairing mode and clear the list of
players simultaneously.
Multi point operation
The Amiron wireless can be paired to up 8 Bluetooth enabled devices. Active connections
can be established with up to two devices at a time. However, playback of music and
phone operation is only possible with one device at a time. Phone operation has priority
over playback of music; i. e. playback of music is interrupted during phone calls.
The following priorities apply during the use of playback devices:
Priority Profile
1 HFP (phone operation)
2 HFP (phone operation)
3 A2DP (playback of music)
4 A2DP (playback of music)
Setting up multi point
• Pair the Amiron wireless with the first device (refer to "pairing with the player").
• Deactivate the Bluetooth connection on the first device.
• Switch the Amiron wireless off.
• Press the button 3 for 6 seconds to start pairing mode (LED 3 flashes slowly alter-
nating blue and red).
• Pair the Amiron wireless with the second device (refer to "pairing with the player").
• Re-activate the bluetooth connection to the first device that automatically connects
to the Amiron.
• Once both devices are paired with the Amiron wireless, the Amiron wireless
automatically connects with both devices each time it is powered up.
Playback device (PD)
PD 1 (device used first)
PD 2 (device used second)
PD 1 (device used first)
PD 2 (device used second)
9