Beyerdynamic AMIRON WIRELESS Handbuch Seite 16

16
Headphones LED display table
Charging
Fully charged
Switching off
Battery almost empty
Bluetooth connection mode active
(Pairing)
Bluetooth connection active
Bluetooth connection lost
Media playback active
Incoming call
Call active
Playback device settings for best wireless sound
To achieve the best possible Bluetooth sound with Amiron, consider the following
practical hints:
• Set the volume of the Amiron to minimum, of the playback device to maximum. From
then on, adjust the volume on the Amiron only, not on the playback device. This applies
only to playback devices that do not automatically synchronise the volume.
• On playback devices that automatically synchronise the volume (e.g. iPhone, iPad,
various Android smartphones), the headphones volume is always identical to the
volume of the playback device.
• Deactivate any audio effects that might exist in your player software.
• Ensure that aptX™ HD is switched on at the Amiron wireless, if supported by your
playback device.
Amiron wireless – Headphones
red LED flashing
LED permanently lit
LED lights up one time for 1.5 sec.
red LED flashing fast 3 x
red and blue LED flash alternating
blue LED flashes slowly with
interruptions of 7 sec.
blue LED flashes slowly with
interruptions of 3 sec.
blue LED flashes slowly with
interruptions of 7 sec.
blue LED flashes fast with interruptions
of 1 sec.
blue LED flashes slowly with
interruptions of 7 sec.