Beyerdynamic AMIRON WIRELESS Handbuch Seite 8

8
Turning on / off
The functions listed below refer to the Amiron wireless when it has already been paired
with a Bluetooth enabled device.
• Turning on:
Hold down the button 3 for approx. 2 seconds.
The LED 3 will illuminate red once.
• Turning off:
Hold down the button 3 for approx 6 seconds.
The LED 3 will illuminate red once and then go out.
Pairing with the player
Before you use the Amiron wireless for the first time, you have to pair it with your mobile
phone or another Bluetooth enabled device. The pairing process may be different with
various players. Please refer to the appropriate manual of the player.
• When the Amiron wireless is turned off, press the button 3 for 6 seconds to start
the Bluetooth mode. The LED 3 will rapidly flash blue and red in turns.
• Activate the Bluetooth function on your player and, if necessary, search for new
devices.
• Select "beyerdynamic Amiron wireless" under the available devices in the Bluetooth
menu of your player and pair both devices. Each time when turning on, both devices
are paired automatically.
Alternatively, you can connect the Amiron wireless
with an NFC-capable playback device through NFC.
The Amiron must be switched on. It does not matter
whether the Amiron is in pairing mode or not.
• Activate the NFC function on your playback de-
vice so that all necessary information can be
transmitted to the playback device and a connec-
tion can be established.
• Hold the playback device to the left headphon
housing so that the two NFC chips are close to
each other. If required, test this by sliding move-
ments.
Amiron wireless – Headphones