Supply Mv Or Volts; Ma Measurements - GE Druck DPI 832 Benutzerhandbuch

Operation - Supply mV or Volts
To supply mV or Volts:
1. Connect the instrument (Figure 2) and, if necessary,
adjust the Set Up (Table 1).
2. Select the Volts output task from Select Task (Table 2/3)
and select the necessary range (mV or Volts).
3. If necessary, adjust the Settings (Table 5).
4. Supply the output values to the system (Table 7).
Figure 2: Example configuration - To supply mV or Volts
Operation - Supply mA
To supply a current:
1. Connect the instrument (Figure 3) and, if necessary,
adjust the Set Up (Table 1).
2. Select the applicable mA output task from Select Task
(Table 2/3).
3. If necessary, adjust the Settings (Table 5).
4. Supply the output values to the system (Table 7)
K393 Issue 3
0 ... 120mV
0 ... 12V
Volts
mV
Volts
Edit Settings
Maximum: 30V
Edit
a) with external loop
Figure 3: Example configuration - To supply mA
Operation - mA measurements
To measure a current:
1. Connect the instrument (Figure 4) and, if necessary,
adjust the Set Up (Table 1).
2. Select the applicable mA input task from Select Task
(Table 2/3) and, if necessary, adjust the Settings
(Table 4).
Maximum: 30V
a) with external loop
Figure 4: Example configuration - mA measurement
Settings Edit
b) with internal loop
power power
Settings
b) with internal loop
power power
[EN] English -
Settings
Settings
7