Master Dimmer - Cameo MULTI PAR Bedienungsanleitung

OPERAtiOn:
iR ACtiVE
In "IR ACTIVE" mode, the multi-PAR lighting system can be
controlled solely via the included infrared remote control. To
control the lighting system in this mode, press the MODE
button repeatedly until "IR ACTIVE" appears on the display.
Then press ENTER, the cursor appears in the
bottom line of the display, and select "ON" by using the UP
or DOWN buttons. Confirm the input with ENTER.
If you later want to control the system in DMX mode, by
footswitch or in a standalone mode, set the "IR ACTIVE"
mode to "OFF" again in the same manner.

MAStER DiMMER

The "MASTER DIMMER" lets you set the basic brightness
of the lighting system in the standalone modes. Press the
MODE button repeatedly until "MASTER DIMMER" appears
on the display. Then press ENTER. The cursor appears
in the bottom line of the display. Use the UP and DOWN
buttons to set the desired basic brightness (00 - 99) and
confirm the input with ENTER.
14