Cameo MULTI PAR Bedienungsanleitung Seite 6

intRODuCtiOn:
lED MultiPAR lighting SYStEM
(CLMPARCOB1)
COntROl FunCtiOnS:
• 3-Channel, 4-channel, 5-channel, 6-channel, 7-channel, 8-channel, 12-channel and 17-channel DMX control
• Separate control of the LEDs red, green and blue
FEAtuRES:
• 4 x 30 W powerful TRI-Colour LEDs
• COB (Chip-On-Board) technology for uniform colour distribution
• Music control via built-in microphone
• Colour change rate and stroboscope effect controllable via control panel, DMX, and remote control
• Multicolour colour change
• Master/slave functionality
• Rugged, flat housing
• Power Consumption: 55 W
• Absolutely silent thanks to convection cooling
• Longlife LEDs with especially long service life
• Lit multifunctional LC display
• 2 additional external lights mountable on bar
• Power supplied to the external lights via 2 separate, switchable Schuko power outlets
• 28 mm TV spigots
• Multifunctional infrared remote control included
• Remote control via 4-way footswitch (optional)
• Transport case included
OPERAtiOn:
The Cameo CLMPARCOB1 is a DMX-512 controllable LED lighting system with RGB colour mixing that excels due
to highly efficient, extra bright LEDs. The intensity of the three colour groups (red, green, blue) can be controlled
independently of one another, thus permitting an unlimited number of different colours. The Cameo multi PAR
LED lighting system can be used as a standalone unit, via IR remote control and foot switch, and also in master/
slave mode, with music control, and via DMX-512 protocol.
6