Cameo MULTI PAR Bedienungsanleitung Seite 12

OPERAtiOn:
nOtE:
The effect speed and stroboscope frequency can each be
adjusted separately for programs 02 – 14. Press ENTER
repeatedly until the cursor appears in the top line of
the display and then use the UP and DOWN buttons to
select the desired program 02 – 14. Press ENTER again
to confirm the change and move the cursor to the field
"Speedxx" in the bottom line. Now the effect speed can
be set using the UP and DOWN buttons. "01" stands for
the slowest and "99" for the fastest speed. Pressing the
ENTER button again confirms the input and moves the
cursor to the "Flashxx" field. Now the stroboscope effect
can be set as desired using the UP and DOWN buttons.
"Flash00" stands for stroboscope effect deactivated,
"Flash01" for the slowest and "Flash99" for the fastest
flash frequency. Once the desired stroboscope effect has
been set, press ENTER to confirm the input.
With the programs 13 and 14 (FLOW8 and FLOW9) the two
colours to be used in the programs may be determined
separately in addition to speed and strobe effect. Select
one of the programs FLOW8 or FLOW9 and press ENTER
repeatedly, until C1:x C2:x appears on the display. The
cursor is now located at C1:x and you can use the UP and
DOWN buttons to select the first colour, and after pressing
ENTER again, you can select the second colour (C2:x).
AutO Run
In AUTO RUN mode, various colour change, colour fade,
and meteor programmes run in succession. Press the
MODE button repeatedly until "AUTO RUN" appears on the
display. To set the number of repetitions for each program,
press ENTER. The cursor appears in the bottom line, in
the "FQN:xx" field. Use the UP and DOWN buttons to set
the number of repetitions for the individual programs.
"FQN:01" stands for a single repetition, "FQN:99" for 99
repetitions of the programs. Press ENTER to confirm the input.
12