Herunterladen Diese Seite drucken

Olio Motore - Betamotor RR 125 MOTARD Anleitung

Vorschau ausblenden Andere Handbücher für RR 125 MOTARD:

Werbung

OLIO MOTORE

3
Controllo
Tenere il veicolo in posizione
verticale rispetto al terreno.
Controllare la presenza del-
l'olio.
Per ripristinare il livello proce-
dere al rabbocco attraverso
il tappo di carico A.
Sostituzione
Eseguire sempre la sostituzio-
ne a motore caldo:
- Posizionare un contenitore
sotto al motore
- Svitare il tappo di carico A
e quello di scarico B
- Vuotare completamente il
carter
- Chiudere il tappo B
- Introdurre 1200 c.c. di olio
- Richiudere il tappo di cari-
co A.
Attenzione:
l'olio caldo può causare
grave ustioni
38
A
B
Nota:
dopo i primi 500 km di percorrenza sostituire l'olio
motore. Per le successive sostituzioni attenersi alla
tabella a pag. 52, utilizzando i lubrificanti consi-
gliati a pag. 30.
Note:
Change the engine oil after the first 500 km/
350 miles. For subsequent oil changes, follow the
instructions given on the chart on page 52, using the
lubricants recommended on page 30.
ENGINE OIL
Check
Hold the vehicle upright.
Check for the presence of oil.
Remove filler cap A and top
up with fresh oil.
Changing the oil
Always renew the oil while the
engine is hot.
- Place a container under
the engine.
- Unscrew filler cap A and
drain plug B.
- Empty the crankcase com-
pletely.
- Close plug B.
- Pour in 1200 cc of oil.
- Screw on filler cap A again.
Warning:
Hot oil can cause severe
burns.

Werbung

loading

Diese Anleitung auch für:

Rr 125 enduro