Betamotor RR 125 MOTARD Anleitung Seite 20

Capacità di riempimento RR 125 ENDURO - MOTARD
• serbatoio carburante .......................................... 5,7 (lt)
1
di cui lt di riserva .................................................... 1 (lt)
• olio motore .......................................................... 1,2 (lt)
Sospensione anteriore
• forcella idraulica con steli di Ø 41 mm
Olio contenuto nei gambi:
- destro
(livello con tubo a fine corsa 185 mm) .....................
- sinistro
(livello con tubo a fine corsa 185 mm) ....................
Sospensione posteriore RR 125 ENDURO - MOTARD
• monoammortizzatore con regolazione precarico
molla
• Corsa ammortizzatore....................................... 52 mm
Freno anteriore RR 125 ENDURO - MOTARD
• a disco Ø 260 mm con comando idraulico.
Freno posteriore RR 125 ENDURO - MOTARD
• a disco Ø 220 mm con comando idraulico.
20
RR 125 ENDURO - MOTARD
400 cc
400 cc
Filling capacity RR 125 ENDURO - MOTARD
• fuel tank ................................................................
including reserve of ................................................ 1 (lt)
• engine oil .............................................................. 1,2 (lt)
Front suspension RR 125 ENDURO - MOTARD
• hydraulic fork with 41 mm. Ø rods
Oil content in shafts:
- right
(oil level with tube at the end of its stoke at 185 mm)
- left
(oil level with tube at the end of its stoke at 185 mm) ......
Rear suspension RR 125 ENDURO - MOTARD
• single shock absorber with spring preload
adjustment
• shock absorber travel .................................... 52 mm
Front brake RR 125 ENDURO - MOTARD
• disk-type with hydraulic control Ø 260 mm
Rear brake RR 125 ENDURO - MOTARD
• disk-type with hydraulic control Ø 220 mm
5,7 (lt)
.. 400 cc
400 cc