Herunterladen Diese Seite drucken

Betamotor RR 125 MOTARD Anleitung Seite 15

Vorschau ausblenden Andere Handbücher für RR 125 MOTARD:

Werbung

Per riattivare le pagine:
premere MODE da pagina 2 (default) e mantenerlo
premuto per un tempo => di 10
Se nessuna pagina era oscurata si oscureranno tutte
esclusa la pagina 2.
Per riattivarle ripetere l'operazione.
Cancellazione parametri TRP, SPEED max, LAP
I parametri cancellabili sono:
- Percorso indicato da TRP
- SPEED max velocità massima raggiunta
Tempi indicati da LAP
La cancellazione dei parametri è attuabile con MODE
a mezzo fermo.
Cancellazione TRP e SPEED max
Premere MODE in presenza della grandezza che si
vuol azzerare fino alla comparsa in sostituzione del
numero delle "- - - -", al rilascio il numero si presenterà
0.0
Cancellazione LAP
Premere MODE in presenza del LAP.
Mantenerlo premuto fino alla presentazione delle
barre " - - - - " che resteranno visibili per 1,5" rilascian-
do MODE con le barre presenti il cronometro si
presenterà a 00:00.
Se MODE viene mantenuto premuto fino alla
ricomparsa del numero precedente si passa alla
pagina successiva conservando i valori LAP
To display the pages again:
Press MODE while page 2 (default page) is displayed
and hold it down for 10 seconds or longer.
If no page had been blanked out, all pages will be
blanked out with the exception of page 2.
To display the pages again, repeat the above pro-
cedure.
Resetting the TRP, SPEED max and LAP parameters
The following parameters can be reset:
- TRP, trip counter
- SPEED max, maximum speed
LAP times
The parameters can be reset by pressing the mode
button while the vehicle is stationary.
Resetting the TRP and SPEED max parameters
Press MODE while the parameter to be reset is dis-
played until "- - - -" replaces the figures. When the
button is released, "0.0" will be displayed.
Resetting the LAP parameter
Press MODE while the LAP parameter is displayed.
Hold the button down until "- - - -" is displayed.
Releasing the button while the bars are displayed
(they remain visible for 1.5 seconds) resets the stop-
watch to 00:00.
Holding down the MODE button until the original
figure is displayed again brings up the next page,
leaving the LAP values unaltered.
1
15

Werbung

loading

Diese Anleitung auch für:

Rr 125 enduro