Sentiotec Pro D2i Gebrauchsanweisung Seite 114

Installation instructions, for professionals only
Querying the software version
To query the software version of your sauna control unit, carry out the follow-
ing steps:
1. Open the technician menu (see page 38).
2. Select "SOC" or "SOP" by pressing the mode button D.
● "SOC" displays the control panel software version (e.g. 116)
● "SOC" displays the power unit software version (e.g. 202)
3. Make other settings or leave the technician menu by pressing the On/Off
button A for about 3 seconds.
Exiting the technician menu
1. The technician menu is closed by pressing the On/Off button for about
3 seconds.
2. Then switch the power unit off for about 10 seconds. (see "Switching off
the power supply unit" on page 60).
p. 44/70