Operation; Switching On The Light On The Power Supply Unit; (Cleaning Lights); Switching On The Power Unit - Sentiotec Pro D2i Gebrauchsanweisung

Instructions for use for the user

10. Operation

10.1. Switching on the light on the power supply unit

(cleaning lights)

The light in the sauna room can be switched on and off at the power supply unit
independently of the On/Off switch F.
● To switch the light on or off on the power supply unit, press the light switch E.
If the light switch E is switched on, the sauna room light will operate at
full power. If you wish to dim the light using the control panel, switch off
the light switch E.

10.2. Switching on the power unit

WARNING!
Risk of fire
Combustible objects that are placed on the sauna heater could ignite
and cause fires.
● NEVER place combustible objects on the sauna heater.
● Make sure that NO combustible objects have been placed on the
sauna heater before the sauna control unit is switched on.
In order to be able to use the control panel, the power supply unit must be
switched on.
● Press the On/Off button F to switch the power supply unit on.
► The control panel is in standby mode.
► The display 1 on the control panel shows "---".
p. 48/70