Connecting The Control Panel - Sentiotec Pro D2I Gebrauchsanweisung

Installation instructions, for professionals only

5.2. Connecting the control panel

1. Feed the connection cable for the control panel through the cable gland 4
into the low-voltage connection area 1.
2. Connect the plug of the RJ-10 cable to the connection socket h.
The sauna control units of the Pro D series enable operation of up to
2 Pro D control panels and an additional output control panel on one
power supply unit. Always use the "Y adapter" supplied with the control
panel for connecting the optional control panel ("3.2. Optional acces-
sories" on page 10).
Fig. 9 Connection example of the Pro D3i
p. 28/70