Scope Of Delivery - Waeco PerfectView Accessory Bedienungsanleitung

_RV-SWITCH-SV.book Seite 19 Dienstag, 10. März 2009 2:41 14
PerfectView
When the negative terminal of the battery is disconnected, all data stored in the volatile
memory will be lost.
The following data must be set again, depending on the vehicle equipment options:
– radio code
– vehicle clock
– timer
– on-board computer
– seat position
You can find instructions for making these settings in the appropriate operating
instructions.
Observe the following instructions when working with electrical parts:
When testing the voltage in electrical cables, only use a diode test lamp (fig. 1 1,
page 3) or a voltmeter (fig. 1 2, page 3).
Test lamps with an illuminant (fig. 1 3, page 3) consume voltages which are too
high and can damage the vehicle's electronic system.
When making electrical connections, ensure that
– they are not kinked or twisted
– they do not rub on edges
– they are not laid in sharp edged ducts without protection (fig. 2, page 3).
Insulate all connections.
Secure the cables against mechanical wear with cable binders or insulating tape,
for example to existing cables.
3

Scope of delivery

No. in fig. 3, Quanti
page 4
1
2
3
4
–
Description
ty
1 control box
1 connection cable for vehicle electrics
1 switch for manual activation of the
cameras
1 connecting cables for control box –
monitor
1 installation material
Scope of delivery
Item number
RV-SWITCH-SV
RV-502-M/M
19