Technical Data For 1 Motor - G-U ELTRAL K60 24 V Montage- Und Bedienungsanleitung

5

Technical data for 1 Motor

Type
Push / pull force
Travel
Nominal voltage
Current consumption at nominal load
Push speed (2/3 load)
Duty ratio
Ambient temperature
Protection class
Connecting cable
Dimensions (H x D x L)
Weight
The specifications stated in this table are not binding and may be changed without prior notice.
Motor side
Mounting dimension
Cable exit
Drives preset for tandem operation are delivered as a set and may only be
º œ
installed as a set of master and slave.
ATTENTION
In the case of programmed synchronisation of two drives, the drive must be
º œ
mounted and connected according to the sequence specified on the sup-
plemental label.
For example, programmed tandem operation for synchro drive set
º œ
09.2013 | G27601 | Printed in Germany
Total length
Drive 1: Master
Drive 2: Slave
230V
200 N - 250 N (see chap. 6)
200, 300, 400 mm
230 V ~ 50 Hz
0.2 A
8 mm/s
30% (10 min)
-5° bis +75° C
IP32
4x0.75 - approx. 3 m long
26 x 41 x 475 / 520 / 570 mm
approx. 1.0 kg
Travel Mounting dimension Total length
Travel
21