Fuses - SWM RS 650 R 2016 Kurzanleitung

FUSES

Fuse malfunction could cause problems for the mo-
torcycle. To access the three fuses (two 15A and one
20A) proceed as follows:
Insert the key into the lock (1) and turn it clockwise
to unhook the saddle from the rear hook and re-
move the saddle.
Remove the cover of the electrical parts where the
fuses are identified as FP, FM, FDC, (to identify other
parts, consult the Use and Maintenance Manual
contained in the USB key).
To prevent short circuits, turn the On/Off switch to
OFF, BEFORE working on the fuses.
• Do not use fuses with a different capacity
from the original one.
QUICK RS-SM_A000PP00695_ed1_06-2015.indd 17
FP- 20A (cable sheath with "P" written on it):
Fuel pump, HV coil, Lambda probe heater, injector;
FM- 15A (cable sheath with "M" written on it):
12V locked up (system voltage), position lights;
FDC- 15A (cable sheath with "DC" written on it):
heater fan, rear stop, high beam, low beam, direc-
tional signals, horn, dashboard power (instrument
function viewing).
1
FM FP
FDC
EN - 17
14/07/15 16:39