SWM SM 125 R 2016 Kurzanleitung Seite 41

INSTRUCTIONS FOR USING THE MOTORCYCLE
STARTING THE ENGINE
- set ignition key (1) in " " position (the buzz
that you hear when you turn the key to "
caused by the fuel pump which puts the feeding
system under pressure);
- pull the clutch lever (2);
- shift the gear pedal (3) into neutral position;
- Check that the button (4) is in the out position
and press it, followed by the start button (5).
NOTE
When starting with an already warmed up engine
DO NOT USE the starter. When a cold engine has
just been started, do not increase revs, to ensure
an adequate oil warm-up and circulation.
NOTE
A safety switch is set on the clutch lever support.
This switch allows you to ONLY start the engine
with the gearbox idle, or with the gear engaged
and the clutch lever pulled.
With the stand lowered, the bike can only be start-
ed with the gear in neutral.
Quick RS-SM_125_MY16_ed00_11-2016_CodA000P01895.indd 9
" is
N
3
1
RIGHT HAND HANDLEBAR SWITCH
2
The right hand handlebar switch contains the fol-
lowing commands:
1) Engine start button
2) Emergency switch to shut off engine.
4
5
2
1
EN - 9
15/12/16 12:40